Larson Davis System 824 Precision Sound Level Meter Kit

Description

Larson Davis System 824 Precision Sound Level Meter Kit
ANSI/IEC Type 1 Sound Level Meter
Features:
2MB internal memory allows for large data files
105dB+ Dynamic Range (< 25 to > 140dBA in standard range)
Low system noise floor: < 16dBA typical in ISM mode (377B41 mic)
Easy, one-handed operation
4 Hours of Operation using 3 AA Batteries
Works with any standard 200V or 0V condenser microphone: choice of microphone available
Microphone extension cabling supported to 150m/500ft
Backlit keypad
Backlit LCD display with full navigation, even while collecting data
Usability
:
RMS, Peak A, C and Z Frequency Weighting
RMS Slow, Fast and Impulse Detection
Building Acoustics: RT60, NCB and RC calculations
Multiple setup configurations can be stored on each meter
Outdoor kits and options available for unattended monitoring
824 Util Software allows meter setup and data download
Real Time 1/1 & 1/3 Octave Frequency Analysis
FFT real time analysis, to 400 lines
Accelerometer connectivity & ICP® power for vibration measurements
Audiometry firmware & additional audiometer test hardware available
Wind Speed
Onboard Storage Capabilities Offer:
2 million point single parameter Time History (e.g., LAeq at 1.0 dB resolution)
1 million point single parameter Time History (e.g., LAeq at 0.1 dB resolution)
70,000 RTA 1/1 octave spectra
60,000 LOG intervals without Ln data
35,000 LOG intervals with Ln data
28,000 point 1/3 octave SSA Leq Time History or RTA 1/3 octave spectra
20,000 intervals with 1/3 octave Leq spectrum
12,300 SSA intervals with Leq and Max 1/3 octave spectra
2,400 FFT 400-line snapshots
Modes/Applications:
<>  Integrating Sound Level Meter (ISM)
<> Sound Spectrum Analyzer (SSA)
<> Logging Sound Level Meter (LOG)
<> Real Time Frequency Analyzer (RTA)
<> Fast Fourier Transform Analyzer (FFT)
<> Audiometer Calibration and Electro-acoustic Test System
<> Building Acoustics
<> Environmental Noise Monitoring
<> Pass by Noise Systems
Included is one of each of the following parts:
- 824 Precision Sound Level Meter
-  2560 1/2 Inch
Random
High
Sensitivity
Microphone complete with case
-  PRM902 1/2 Inch Microphone Preamplifier with LEMO® Connector
- CBL006 Serial cable (RS-422/RS-232)
- CBL002 Serial Printer cable
- Reference and Training Manuals
- Genuine Larson Davis hard sided storage case (shows some general wear and scratches on the outside)
Note: This listing is for the SLM and includes the items listed above.  Not included the
other
components
that may be required to complete a particular measurement system.
Note:  Specifications given above are per current 824 factory specifications and may vary for this
instrument
due to date of manufacture and the current calibration settings.
Shipping:  Will be via USPS or FedEx