National Instruments PCI-7324 Motion Controller Card, 4-Axis, Stepper Motor

Description

National Instruments PCI-7324
motion controller card for 4-axis closed-loop stepper motor control.
Untested, but believed to be fully functional.
Important note: This is a legacy card that is not compatible with NI Motion drivers. This card requires NI ValueMotion software, which is only supported under Win 2000 and earlier versions of Windows.
The 7324/7314 controllers are stepper motor controllers for PCI
and PXI bus computers. These controllers provide fully programmable
motion control for up to four independent axes of motors, with additional
I/O for limit and home switches as well as other general-purpose functions.
You can use these controllers in position or velocity control applications,
with support for point-to-point position, velocity profiling, and event-based
motion profiling modes.
The 7324 closed-loop controllers control stepper motors and can operate in
open or closed-loop mode. They use quadrature encoders for position and
velocity feedback, and clockwise (CW) / counter-clockwise (CCW) or
step/direction digital outputs for command. The 7314 open-loop stepper
controllers do not include the quadrature decoders and can operate only in
open-loop mode. All controllers support full, half, and microstepping
applications.
For additional information, refer to NI
website
.